Silicone Coated High Density Polyethylene Release Film, 30micron-80micron, Red, for Tape, Die cut, waterproof membranes.
HDPE (low-pressure high-density polyethylene) Film:
| Raw Material |
Non-toxic, tasteless, odorless white powder or columnar or semicircular particles with abrasion resistance, tolerance, impermeability, flammability, and poor flexibility. Melting point is about 130°C, relative density 0.941-0.965. |
| Machenical performance |
Good heat resistance and cold resistance. Good chemical stability,High rigidity and toughness, good mechenical strength, ielectric properties, resistance to environmental stress cracking is also good. |
|
Process |
The raw material is formed by co-extrusion film blowing machine and after corona and coating treatment, it is widely used in mechanical products packaging release film, HMA packaging release film, Foam tape release film, Asphalt-based or Butyl adhesive and other adhesive protection release film, filling release film,etc. |
| Color | Red or customized |
- Typical Properties
| Density | g/cm³ | 0.94-0.965 |
| Thickness | micron | 40 ± 5 |
| Width | mm | up to 1600 |
| Max. Tension | N50mm | ≥30 |
| Elongation @ break | % | ≥150 |
| Release Force | gf/25mm | 3-8 |
| Sub-sequent Adhesion Rate | % | ≥85 |
| Length | m/reel | 5000, customized |
- Advantages
| Consistent quality | Rather than Thermal Cured Silicone Coating, the UV Cured Silicone Coating will bring the consistency in flatness and stability in the Release effectiveness. |
| Versatile surface treatments for option | Anti-static, UV-Resistance |
| Printability | Excellent |
Please rest assured that the HSF film products will make your customers love using them!
And please don't forget to drop us some messages for collecting some desirable samples for initial assessment.
Our products are sold all over the world, you can rest assured.
